Hey Everyone
I just wanted to put out an update that the following items have been restocked:
Commander Deviss Helmet
Commando Fixer Helmet
Assault Rex Helmet
If you were looking to get these, I’d suggest picking them up soon. There is no fixed date for restocks after all.
Thank you for your continued support,
Apples
Good day everybody.
As the title states, it’s time for a review of the last of the Printed helmets that had come out with this release.
So here we go:
Left to right: Pre Vizla Helmet(Displayed with Alien Conquest legs and Torso / BrickArms Tactical Sword/ Si-Dan Toys belt / Arealight Jet pack)
Rav Helmet (Painted Arealight Jet pack, Painted Power Miners Legs, Painted BrickForge Vambraces, Printed Arealight Torso with Red battle suit)
Arealight did a great job with getting the detail in on both of these helmets.
Alright, so we’ll go ahead and start off with the Pre Vizla Helmet. First off, the Helmet does seem quite accurate in comparison to the reference picture. The helmet itself is done very well, it has a very crisp printing job and the dark silver is actually printed all the way around the helmet. 
The Dark Silver is a close match to both Brickarms’ Gun Metal and Brickforge’s Steel as well as the Platemail print for the new Lego Kingdoms knights. If you’re looking for a paint color to match this helmet, I’d suggest using Citadel’s Bolt Gun metal. The white on this helmet is transparent, but it works fine here since it is just small detailing ont he helmet. The highlights on the helmet seem to be a nice purple color. If you need something to match those highlights to, the Alien Conquest alien color works quite well. Over all, this is a great helmet; definitely worth it if you were looking into getting this helmet.
Moving on to the Rav helmet: This is personally one of my favorites. This helmet matches the reference quite well. The silver on the helmet is just plain beautiful and is printed relatively well. There are a few tiny tiny gaps that aren’t really noticeable unless you look closely between the print surrounding the visor and the sides of the helmet. The black print is very nice as well and goes from front to back.
The red of the helmet is a match to Lego Red, and the silver matches the Lego light silver. If you’re looking for paint to match the silver, Citadel’s Mythril Silver does the job well. The helmet also fits quite well with Arealight’s printed Torso, though I’m pretty sure they’re referenced from the same character. With that said, I can definitely recommend this helmet to anyone looking into getting a Mandalorian helmet for their collection.
Back photo of the helmet. The design goes all the way around.
Now as for the helmet itself, I’d like to make a note that it does in fact hold Arealight’s Phase 1 Visor.
HOWEVER, it is very hard to remove once you get it in; so do this at your own risk. The visor was not made for this helmet, but it does fit it very well and still moves up and down.
Alright so all in all: I would highly suggest you pick these up if you want some printed Mandalorian helmets. I personally like both quite a bit.
I hope you enjoyed these reviews and that they helped you in making your decision to purchase or not.
-Apples
Alright. So With that said, I’d like some input:
Arealight put me in charge of the blog, sort of; so I want to know what you, the reader, would like to see on here. What would make things interesting for you?
Good day everyone!
I’ll be doing two separate reviews for the “Neyo” and Mandalorian helmets on request.
First off, we’ll be reviewing the Printed “Neyo” helmets.
From Right to left: Neyo Helmet (Displayed with AT-RT Recon Trooper torso) / Clone Assassin Helmet (Displayed with a Clone Trooper Torso and custom printed Legs off of Bricklink)
Alright so, let’s start off with the Neyo Helmet. The 91st Logo is very crisp and printed in a Lego Dark Red ink. The mouth print and line above the visor are printed in black and everything else is the dark blue grey found on the Camo ARF trooper helmet.
The Dark bluish-grey actually works well here since it’s only detail work. I would like to mention that the over all print job on this helmet is extremely crisp and clean. Personally I prefer this helmet out of the two printed “Neyo” Helmet options.
The second helmet for this review is the Clone Assassin helmet. This helmet totes a dark purple print that doesn’t exactly match lego’s dark purple; but is still quite close. The logo printed on the helmet is the same as the 91st Reconnaissance Corps logo printed on the Neyo Helmet, just in dark purple and on the opposite side of the helmet. (Refer to above picture)
The Dark purple is used for the vents, dot on the ear pieces and the printing on the back. The mouth and line above the helmet are both black. As requested on Flickr, I also decided grab a shot of the helmet with the new Azure Blue arms from the Alien Conquest line.
For those looking to make a clone assassin, here is what I would suggest: either paint the top half of those Alien Conquest arms white or go for the BrickForge Vambraces in Medium blue. I wasn’t able to find mine, but the sword from the Blacksmith Attack set from Lego might work nicely as the blades attached to the Trooper’s arms.,
EDIT: I’d like to apologize, I originally had dark blue listed as the color; however it was dark purple. The Dark purple on the clone assassin helmet is a close match the Lego’s purple (not alien conquest purple), it’s just a tad dark.
There isn’t really anything super special to mention about the top of the helmets as there are no details that are suppose to go from front to back on these, but here is a photo for reference.
Over all, I prefer the Neyo helmet over the Clone assassin helmet because it has a bit more color variation to it and the printing is a bit crisper for the Neyo Helmet. Either way you go, you can’t really go wrong.
I hope this helps in your decisions, enjoy.
-Apples
Later today I’ll be posting the Mandalorian Helmet Review.
Alright, so today we have the Clone Commando Helmets.
Left to right: Scorch Helmet, Fixer Helmet, Sev Helmet, Boss Helmet, Omega Helmet
Scorch Helmet: Stormtrooper torso / Alien Conquest Legs // Fixer Helmet: Old Phase 2 Clone battle pack clone // Sev Helmet: Shock Trooper torso // Boss Helmet: Bomb Trooper torso and legs //Omega Helmet: Hazel Fantasy Emile armor with Alpha Team legs.
Alright so Arealight was nice enough to send me a copy of each of the commando helmets to review; so I think I’ll go ahead and start off with the Scorch Helmet.
The Scorch helmet itself is alright, but it doesn’t really match the reference work that well. The white ink used to print is a bit transparent so it isn’t a Lego white. Also, the lack of the mouth part on the lower area of the helmet is a bit of a let down for me. In my opinion had Arealight printed the helmet on a Dark bluish grey or light bluish grey helmet and done the black visor print with the white design print it would have been better.
Anyways, moving on to the Fixer helmet. The fixer helmet has a green stripe that goes from the front to the back and a black visor. The design itself is pretty nice and it matches with the Lego green color. It does not match with the sand green in the new battle packs.
I posted a picture since I think I remember seeing a few questions about the match.
Next up is the Sev helmet. I’m actually glad Arealight released this as I remember right when the Fixer, boss, and scorch helmets came out everyone was asking : Where’s Sev? Anyways, Sev is a pretty well designed in my opinion. The red seems to me to be a Lego red and the design does have a bit of a smear, making it look as though the “paint” was smeared across his helmet. The design for the blood smear only goes half way though, which I believe is how it is in the games anyways.
The one issue I do have is that the design sort of looks like it abruptly stops in a straight line. I think it would have been nicer if the thicker lines continued to the back and gradually got thinner. Over all, pretty good still.
Moving on to the Boss Helmet. This is personally my favorite out of the five, for some reason I just like the design. The helmet has a orange stripe with two black stripes running a long side it from front to back. The Orange matches perfectly with Lego’s orange color and works well with the Lego Bomb Trooper body. I think out of all of them, Arealight did the best job of recreating the reference with this helmet.
Alright, so the last Commando helmet in Arealight’s line up is the Omega Commando Helmet. I personally like this design, it’s simple and it matches the reference relatively well while still allowing it to match with a silver that Lego uses quite often. There isn’t to much to say about this since it’s such a simple design, but I think it would go well with Brickforge’s silver clone trooper decal.
A few other notes I should make is that they do not have printing on the back. [I don’t think they really need to with the amount of detail Arealight included in the base helmet though]
Also the “ears” of the helmet do not have printing on them either.
Also they do not have the gradient visor like in the references, but I just see this as them not having their visor lights turned on.
So to sum it all up,
The Commando helmets are a pretty good buy if you like them, I personally recommend the Boss helmet the most; it is the easiest to source parts to make a decent looking figure with. Otherwise, the other helmets are just as good.
Thank you for your time, and I hope this helped you decide on what you’d like to get.
-Apples
As a side note, there are one or two more reviews left depending on whether I want to do the Neyo helmets and Mandalorian helmets in one review or two. After that there may be a few other things popping up here and there.
