Tag Archives: Helmet

Clone Commando Helmets

Posted on by

Alright, so today we have the Clone Commando Helmets.
Left to right: Scorch Helmet, Fixer Helmet, Sev Helmet, Boss Helmet, Omega Helmet

Scorch Helmet: Stormtrooper torso / Alien Conquest Legs // Fixer Helmet: Old Phase 2 Clone battle pack clone // Sev Helmet: Shock Trooper torso // Boss Helmet: Bomb Trooper torso and legs //Omega Helmet: Hazel Fantasy Emile armor with Alpha Team legs.

Alright so Arealight was nice enough to send me a copy of each of the commando helmets to review; so I think I’ll go ahead and start off with the Scorch Helmet.

The Scorch helmet itself is alright, but it doesn’t really match the reference work that well. The white ink used to print is a bit transparent so it isn’t a Lego white. Also, the lack of the mouth part on the lower area of the helmet is a bit of a let down for me. In my opinion had Arealight printed the helmet on a Dark bluish grey or light bluish grey helmet and done the black visor print with the white design print it would have been better.

Anyways, moving on to the Fixer helmet. The fixer helmet has a green stripe that goes from the front to the back and a black visor. The design itself is pretty nice and it matches with the Lego green color. It does not match with the sand green in the new battle packs.

I posted a picture since I think I remember seeing a few questions about the match.

Next up is the Sev helmet. I’m actually glad Arealight released this as I remember right when the Fixer, boss, and scorch helmets came out everyone was asking : Where’s Sev? Anyways, Sev is a pretty well designed in my opinion. The red seems to me to be a Lego red and the design does have a bit of a smear, making it look as though the “paint” was smeared across his helmet. The design for the blood smear only goes half way though, which I believe is how it is in the games anyways.

The one issue I do have is that the design sort of looks like it abruptly stops in a straight line. I think it would have been nicer if the thicker lines continued to the back and gradually got thinner. Over all, pretty good still.

Moving on to the Boss Helmet. This is personally my favorite out of the five, for some reason I just like the design. The helmet has a orange stripe with two black stripes running a long side it from front to back. The Orange matches perfectly with Lego’s orange color and works well with the Lego Bomb Trooper body. I think out of all of them, Arealight did the best job of recreating the reference with this helmet.

Alright, so the last Commando helmet in Arealight’s line up is the Omega Commando Helmet. I personally like this design, it’s simple and it matches the reference relatively well while still allowing it to match with a silver that Lego uses quite often. There isn’t to much to say about this since it’s such a simple design, but I think it would go well with Brickforge’s silver clone trooper decal.

A few other notes I should make is that they do not have printing on the back. [I don’t think they really need to with the amount of detail Arealight included in the base helmet though]

Also the “ears” of the helmet do not have printing on them either.

Also they do not have the gradient visor like in the references, but I just see this as them not having their visor lights turned on.

So to sum it all up,

The Commando helmets are a pretty good buy if you like them, I personally recommend the Boss helmet the most; it is the easiest to source parts to make a decent looking figure with. Otherwise, the other helmets are just as good.

Thank you for your time, and I hope this helped you decide on what you’d like to get.

-Apples

As a side note, there are one or two more reviews left depending on whether I want to do the Neyo helmets and Mandalorian helmets in one review or two. After that there may be a few other things popping up here and there.

New ARF Helmet Prints

Posted on by

Alright, so today I’ll be reviewing the ARF trooper helmets.

How I put the figures together: ARF Trooper: Body from the new Lego Star Wars Clone Battle pack / Rancor Trooper: Commander Fox torso with custom print legs from bricklink / Camo ARF  trooper consists of a KZ Body armor from Hazel Fantasy and the body from the new Lego Kingdoms sets.

From left to right: Regular ARF Trooper Helmet, Rancor ARF Trooper, Camouflage ARF Trooper

Each of these presents a good amount of detail; not to mention Arealight did do a pretty good job on matching the reference photos as usual. The best starting place would probably be the typical ARF Trooper Helmet.

The helmet with this same design was also produced by Lego, but to be honest I do prefer Arealight’s version better as it just seems more visually appealing to me personally. And since I mentioned it, here is a comparison between Arealight’s ARF Trooper helmet and Lego’s helmet.

As you can see, Lego has a bit crisper printing on the stripes at the top of the helmet. I’m not sure if it’s just my copy of the helmet or if it’s on all of them, but the stripes on the top are a bit blurred. The color for the blocks of color on the front of the Lego helmet match Lego’s sand green (correct me if I’m wrong) while I’m not really sure what the Lego color equivalent would be for the Arealight helmet’s markings. As for the logo on the “sun visor”, Arealight left out some of the small small details there that Lego was able to recreate. Personally, I think it would have looked better if Arealight could have gotten the detail in or if he had altered the logo a bit.  Regarding the shape itself, I personally like the Arealight helmet because it’s a bit more simplistic and surprisingly fits in with Lego figures a bit better than Lego’s version. The fact you can change the visor color by simply changing the head is just an added bonus.

Moving onto the Rancor trooper: [Middle]

Arealight did a fantastic job with this helmet, the detailing matches perfectly to reference and has a great amount of detailing. There really isn’t much to stay about this, the print itself continues all over the helmet essentially.

Arealight had even included a detailed print of the emblem on both sides of the helmet.

Alright so lastly we have the Camouflage ARF trooper helmet. [Far right on all pictures]

At first glance the helmet’s print job doesn’t seem as good as the other two because it’s a design that is suppose to go all the way around the helmet, but it doesn’t.

Beyond that, the design itself is pretty nice. I’m a bit disappointed though, the color of the print currently does not seem to match any sort of Lego parts that are currently out. The closest color to it that I’ve seen is the dark bluish gray. Also the underside of the visor is still a plain white color, so it limits your photography a bit if you want to take a picture of it without showing that white underside.  All in all, I feel as if this was a helmet that was sort of shafted by the printer’s capabilities.

To wrap things  up:
I would say that the ARF troopers that came out this wave were alright, not as good as some of the other printed helmets. But! If you do plan on getting one of the three, I would suggest getting the Rancor trooper helmet as you will definitely be getting one of the better printed helmets out there. As always though, the best thing to do is to pick the one you would like the best. I’m just here to help you decide ;).

-Apples

Check back for more reviews and possibly a few “how to”s after I finish these reviews!

Not usually my job but…

Posted on by

Good day everyone :).
When I joined up Arealight as a spokes person one of the tasks I was given was reviewing products. To be completely honest, I’ve never done this before so this will be the first review I ever do but definitely not the last.

The way this will work is that I will have several items of a single type in one photo.  And I will include single photos as necessary. We all know slow loading times are lame, so I want to keep those loading times as low as possible. I also apologize for the photos, my room is currently a mess as I still haven’t gotten around to making room for a  photo space so I’ve been making due with a little area of my desk.

So, I suppose the best starting point would be the airborne helmets.
So for about $5.00 USD, you can purchase one of these four helmets. The price itself is actually pretty decent when you take into account that the helmets themselves retail for $2.50 and most retailers who will do printing, charge a lot more for the printing on flat surfaces. These figures consist of Brickforge Vambraces, MMCB Waistcape and Pauldrons, Lego Torsos [Clone trooper torso / Snow Trooper Torso/ ExoForce Torso] and Legs [Series 1 Astronaut / Clone Trooper Legs].

From left to right:
Utapau Airborne trooper helmet, a 501st Airborne helmet, Commander Keller Helmet, an Airborne sharpshooter helmet.

Over all they are all pretty nice helmets. Here is a rear view of the helmets:
Each of them look the same on the back and only have the black stripe on the back except for the 501st airborne helmet, which has it’s design continue from the front to the back. The Arealight Jetpack is a tight fit and you can only use the warhead without any real problems with moving the helmet. The only thing is that the helmet itself locks into place if it’s put in a straight forward position.

Here is a side view of the Utapau helmet. One of the two problems I do have with the helmets is the fact that the printing on the stripe on the back goes out of the indention on the helmet, but this is easily fixed with a bit of brasso and paint.  The other problem has to do with the vents on the lower part of the helmet. As you can see, there are some white areas showig out of the black, but other wise these are great helmets.

Here’s an overhead shot, as you can see the pattern on the 501st and Keller Helmets go from front to back.

So to finalize:
Utapau Helmet: This helmet is actually is quite accurate from what I can tell and matches the Lego orange quite well.

501st Helmet    : This one has a single production error on the front of the helmet above the visor, there seems to be what looks like a small chip on the very front of the design. However, Arealight did do a good job of matching the reference picture. The helmet I received of this one is a bit less defined than the rest on the edge of the design in the back.

Keller Helmet     : You really can’t go too wrong with this one. It matches the reference quite well and I personally love the cleanness of the design itself and how it fits so well on the helmet.

Airborne Sniper: Arealight, once again, did a good job of matching the reference for this helmet. The sizing on the design is quite nice in relation to the helmet size.

Overall, I’d have to say that these are pretty good products. The printing in general is pretty crisp and clean and Arealight did do a very good job in matching the reference pictures for these products. The only real problem I found was the line in the back going out of the indention that it seems to be made to fit into. If you’re trying to decide which ones to get out of these (due to lack of funds or what not), I would personally suggest the Keller Helmet mainly for the reason that the design on the helmet itself is very clean and works quite well on this helmet honestly.

Thank you for your time and please check back for future reviews and possible “How-To”s.

2nd Wave Printed Helmets

Posted on by

2nd Wave Printed Helmets
Hi there, I’m glad to present our 2nd wave of printed helmets to you. The 2nd wave will consist of 16 different helmets including variations of the ARF Trooper Helmet, Commander Helmet, Mandalorian Helmet, Airborne Helmet, Neyo Helmet and Commando Helmet. The current street date is set to June 10th, so we hope you enjoy the release and thank you for choosing us for your Lego customizing needs.