Hello everyone!
We’re excited to announce the release of Alter Series 2. We’ve uploaded a ton of new items for you to use with your figures and MOCs. There are lots of fun pieces, but we don’t have many and we aren’t sure when they’ll be restocked; so make sure to pick them up while you can!
And here’s a small preview of what’s to come in the coming month :).
Enjoy~
As always,
Happy customizing.
-The Arealight Team
A bit late, but better late than never.
Finally got a chance to sit down, work with the pieces a bit and actually write something that’s actually relevant about these pieces.
As you can see, I’ve even spent a bit of time decorating the plain white helmets. They’re actually quite fun to paint up if you’re into that. The Merc helmet is by far the easiest to get a nice paint job on due to the high level of detail that is already included on the helmet.
The Merc helmet itself features quite a bit of detail. The antenna is actually molded onto the helmet, which could be seen as a downside; but I just see it as a nice way to make sure that it stays in the right place all the time. The breather part of the face is also detailed quite well and gives a very strong old sci-fi feel and works great for those Old Republic Mercenaries. I personally am quite excited to see how Arealight prints these helmets up. I could definitely see them looking much nicer in other colors than white as well.
And as you would have guessed, it wouldn’t really be too nice to have a Merc helmet without a matching jet pack. The design on this matches perfectly to the source material and will no doubt make a great addition to any figure. It meshes quite well with “older” sci-fi themes outside of just the Old Republic theme. I could even see it very loosely being used in steam punk themes with some modifications. Overall, it’s a great piece. High detail and quite simple to paint or decorate due to all of the details.
Following the Old Republic items, we have the long awaited Combat helmet. This is based off of the trooper helmet from the Old Republic Trailer. I was pretty excited when Arealight began processing this simply because of the fact that Lego released the figure without the helmet; which just seemed so out of place. Beyond just that, the helmet has a great design and really does just look fantastic. The holes on the side of the helmet are specifically designed to tightly grip Arealight’s Phase 1 Sun visors and Phase 1 Macrobinoculars. This means that you can easily raise the macrobinoculars without having to worry about them falling down. I can definitely say I am eager to see how Arealight ends up working the printing on this helmet.
Speaking of Troopers though; that makes a great segway into our next piece. The SpecOps Pack. I personally love the design of this back pack simply since it works so well with most sci-fi themed figures. The back pack allows for enough room to comfortably fit most helmets and is compatible with all Arealight helmets. There really isn’t much else to say about it besides the fact that it is quite an amazing piece. Definitely consider picking these up to go a long with your Commando helmets if you have them!
Up next we have the trooper helmet. This helmet has been long requested by fans due to Arealight’s commander helmet having that hole in the visor. Personally I think this helmet turned out great! I personally feel the shape is much better than Lego’s version and the breathers just give it a much more defined look. The fin is also sized quite well on this helmet compared to how it is sized on others; not too high and not too low. The helmet accepts Lego’s helmet accessories and holds them perfectly with no deformities on the pieces; however Arealight’s Phase 1 Sun Visors and Phase 1 Macrobinoculars are a bit loose. This means that without any adhesive or additive adjustments to the helmet, you won’t be able to mount the macrobinoculars so that they stand straight up on the helmet. I don’t see this as too big of an issue though since being compatible with lego’s accessories makes up for that. One of the things I definitely am excited to see are some special prints coming out for this helmet that make use of it’s closed visor.
The next item on the list is the pilot helmet. I really do like the design on this helmet, Arealight’s attention to detail on this helmet just makes it for me. The bulky design makes it blend in quite well with Lego’s Pilot helmet designs. The one issue I see with this helmet is that it has a bit looser grip than the others; but it still has a decent grip on the head so it isn’t too big of an issue unless you plan on throwing your pilot across the room.
So we had the Trooper helmet with this release, a closed visor version of the Commander Helmet; and Arealight didn’t want to leave the Mando helmet out of the party so he released a closed visor version of the Mando helmet: the Hunter helmet. This helmet is in essence a closed visor version of the Mando helmet with a few adjustments. These adjustments included adding more detail to the back and I believe making the area above where the visor is usually located more defined. The plain face of this helmet makes it great for decaling and I could definitely see some designs that utilize this closed visor being printed onto here in the future. The holes on the side are designed to fit Lego’s helmet accessories, but I believe they will also fit Phase 1 Arealight Accessories. Be warned though! It is very hard to get them attached to the helmet and near impossible to remove them once it’s on! I do not advised if you’re worried about the piece breaking and you don’t have an extra on hand.
Finally, we have the Comm Helmet. This helmet is based off of the Sonic Trooper that showed up ages ago in the Clone Wars Series and is definitely one of those helmet designs that deserves to be available for customizers. Arealight got the design of this helmet dead on and it really does look perfect when compared to the reference material. Again, the blank face plate makes it perfect for decaling, but I could definitely see the raised area on the forehead being a bit of an issue. As I’ve said before though, I definitely am excited to see this in other colors, but in white it still does look amazing
So to sum it up, these pieces are definitely worth checking out; especially if you’re into the decaling or painting scene of customizing. Even if you aren’t, the SpecOps pack and Merc Pack will go a long with almost any sci-fi figure with or without a paint job. Beyond that, the combat helmet also could work fine without any sort of decoration if you were to use the macrobinoculars; although it would be a bit plain… Don’t fret though, as these helmets will be printed onto in the future for those of you that don’t like picking up the paint brush or cutting out decals!
Hey Everyone,
I know it’s a bit late, but I’ve been busy lately.
As Promised though: We’ll be starting off this review with the Mando helmets.
So every want to design your own little bounty hunter or Mandolorian warrior? Well here’s your chance!
I personally love the Mando helmets for that reason. There is just so much potential for your own personal figure with these designs.
First we’ve got the Goran Helmet. This helmet sports a beautiful silver and pearl dark grey print (I believe other vendors refer to this color as Steel or Gunmetal) on top of a black mando helmet. The silver is very vibrant and stands out quite a bit on the black, which is personally why I love how it looks. The printing is very clean and it completely wraps around the helmet. And here are some variants of the helmet
As you can see the design looks quite nice on variant prints that you might receive with your slightly larger orders.
Next up we have the Barin Helmet. The Barin helmet sports some what of a “brass” color printed onto dark bluish grey. Personally this is one of my least favorite prints since the color isn’t as bold. However it still looks nice. If you like the color scheme or the character it’s based on, it would be nice to pick up. As I said though, the color on this helmet isn’t as vibrant as others though.
And here is a photo of the variants. I personally prefer this design printed onto black than the original color. The black just makes the color stick out so much more. Unfortunately that is the freebie variant that you can’t pick out.
Here we have the Galen helmet. Personally I love this one. I’ve always liked the color blue and the silver with dark blue highlights printed onto the blue helmet just looks amazing. This is one I could definitely recommend picking up especially if you were wanting a blue mando helmet for your collection or if you’re a fan of the character. The printing is quite crisp and clean; not to mention it compliments the color of the helmet quite well.
Again, here are more variants of the Galen helmet. Personally I feel the best variants are the silver and white.
Next up we have the Fenri helmet. Personally this is another favorite of mine. The dark red on white is very nice. I also like the extra detail above the T-Visor. The printing is relatively clean, the actual version of my helmet is a bit less crisp than the variants, but it is something I don’t mind overlooking for this helmet since the design and color scheme is so nice.
And more variants for you guys~. The variants for this one are quite nice as well.
Finally we’ve got the Jaster helmet. This one is definitely a great one to pick up as well. The helmet has such vibrant colors that it really makes it worth it. The dark red T visor outline looks quite nice on the dark bluish grey helmet. The silver and black detailing on the sides and cheeks of the helmet also fit quite nicely with the color scheme. The printing on this one is very crisp and very clean as well. I could easily recommend this helmet to anyone looking for a Mando helmet, especially so if you like the color scheme.
Unfortunately I do not have a photo of variants of this helmet to show. So here are some of the other variants you can get of the Jango and Boba Helmets.
To finish off our little Mando splurge, we have a brand new torso print! The Dark Gray Torso Battle Suit; a bit of a mouthful, but a great piece none the less. It is printed on the front…
…and the back!
This is actually a first for Arealight to do. And it is definitely very welcome. It’s fantastic to see the curved torsos getting some more love and I could definitely recommend picking these up. The design consists of a redesigned Mandolorian battle armor based off a specific character. And it matches quite well. The printing is not only very crisp on this, but it’s also very detailed. Arealight included the folds and wrinkles in the fabric of the cloth that you’d expect from someone wearing this type of armor. Outside of that the detail on the belt is just plain amazing; the pockets are shaded where you’d expect them to be and he was really able to create a sense of depth with the design. Honestly the only real “flaw” I can think of is that this torso was specifically designed to be printed onto dark gray; this means that the variants won’t look as nice because part of the design is left blank because of that. However, that shouldn’t deter you from buying the actual torso; as it really does look amazing.
Anyways I hope this review helps anyone who actually hasn’t had a chance to get the new prints yet. Next review will cover wave 7 helmets.
Until next time~
-Apples
It’s been a while hasn’t it?
Well, here we go again with another small review of Arealight’s new printed items. It’s been about a month or so since their release, but since the store was closed a few weeks following, there wasn’t too large of a frame for purchasing them.
Here’s a picture of everything Arealight sent me for this Wave~. The baggie on the left contains lots of the prints on random coloured helmets, the one in the center contains new prints and finally the one on the right contains the helmet mold in new plastic! (We’ll talk about this later~).
So this is for those people who are still debating whether or not to get them or not, I know I definitely get that way sometimes when new product comes out.
For this release we’ve got lots to show! Five new Mando prints, three new commander helmet prints, two new jet packs and reprints of Jesse and Hardcase. Jesse’s design has also been updated to be more accurate.
So from Left to right we have the Force Helmet, Security Helmet, reprinted hardcase, Thorn helmet Jesse Helmet, Dred Jet pack, and Barin Jet pack in the back row. In the front row, from Left to right, we have the Galen helmet, Barin Helmet, Fenri Helmet, Goran helmet, and Jaster Helmet.
Since so many products have been released in this run (a total of 10), I’ll be doing a two part review. For this half, I’ll be reviewing the new commander helmets and the two jet packs and then we’ll take a look at the mando helmets in the next review.
Let’s start with the Force helmet~
The force helmet is based off of an action figure from the extend universe. It’s essentially a regular clone trooper helmet with the Jaig Eyes in black. It’s a very simplistic design, but still is quite nice, I think it would have been a nice touch to have the jaig eyes a different color though (it wouldn’t match the reference however). The helmet itself is completely printed front, back and sides. I could personally see a lot of people using this helmet to modify into a regular clone trooper helmet as well due to it’s simple design. Should you want to do that, it’d just be a bit of brasso each helmet on the front and it’d probably go by pretty quickly. So I would say this would be a pretty nice helmet to add to your collection, and if you want to do some “army building”, it’d be a good way to get regular phase 2 helmets.
And here is a close up of the actual product. The printing is pretty crisp as usual. There was a small blur on my copy on the mouth piece, but I believe I was just a bit unlucky here. The blur itself isn’t really noticeable, and doesn’t show up on any other of the variants of the helmet.
Moving on, we have the Security Trooper helmet.
The security trooper figure, similarly to the force trooper, is based off of an action figure. The design itself is pretty simple, but I still love how this helmet looks despite it’s simplicity. The helmet sports two hatch marks on the side and printing all the way around. Definitely a nice helmet to add to your collection if you like simplicity!
And here is a close up of the helmet. As you can see the print job is pretty crisp and clean as usual.
Next up, we have the Thorn helmet!
The Thorn helmet is based off of Commander Thorn from the Television series. Thorn is pretty popular despite the lack of information on him. The helmet itself sports red printing with a pair of wings on the helmet and printing on the back of the helmet. I would definitely recommend picking this up if you get the chance since it’s just a fantastic design.
And here is a close up of the helmet itself. Unfortunately some of the helmets have a small blur between the wings. However, I personally feel it still looks pretty nice despite this. On the other hand some of them don’t have the blur. Such as in these off color prints.
All in all, if you get any helmet from this print run, pick up this one. It’s definitely one of the nicest designs.
That does it for all of the new commander helmet releases, so we’ll move onto the jet pack releases~
For the jet pack releases, we have two new jet pack releases. First we’ve got the Dred jet pack:
The Dred jet pack is based off of a Mandalorian bounty hunter’s pack. The jet pack sports red printing on a black jet pack and will come with a silver rocket. The printing is simple, but still looks fantastic. Definitely a nice fit for any figures you want to have a jet pack, even if it’s not a Mandalorian. It’s also great in other colours if you happen to get an off color one.
As usual, here’s a close up of the jet pack. The printing is clean and crisp as usual. Definitely a great addition to your collection.
As for the last piece of this release, we have the Barin jet pack.
The Barin jet pack is also based off of a Mandalorian bounty hunter’s jet pack. It sports black printing on a dark bluish grey jet pack and includes a dark bluish grey rocket. The black printing is a bit unique and different from most printing for jet packs. It has breaks in the designs on the pieces attached to the boosters. It’s a very simple design that fits well with many figures outside of Barin. And as usual, looks great on other colors.
As you can see the printing is very crisp and clean as usual. I would definitely suggest picking up at least this pack or one of the other jet packs before they run out.
As a little added bonus, we have the updated Jesse helmet.
The Jesse helmet now sports a metallic republic symbol instead of the blue one from the original helmet.
I feel like it definitely looks a lot better than the original.
If you get a chance, definitely pick up some of these commander helmets and jet packs.
Anyways, join me next time for the Mandalorian helmets.
(Left to right: Boomer Helmet, Shadow Airborne Helmet, Fox Helmet, Shadow Trooper Helmet, AT-RT Gunner Helmet, Kix Helmet)
We are happy to announce that Wave 5 printed helmets are now on the site! Enjoy~
Happy Customizing,
Apples (,, ･∀･)ﾉ゛